Back to Products
Custom

Stock Vertical Blinds

Starting at:  $39.97
• An easy way to create a customized look for large windows and sliding doors
• Curved Crown vanes add a traditional look, or choose S-curve vanes for drapery-like appearance and tighter closure for darkness and privacy
• Headrail width can be trimmed for free while you shop, exclusively at Lowe's
• Available in 15 finishes; fits windows or doors 18"-104" wide and up to 100" tall
Details How to Measure How to Install

Stock Vertical Blinds


Color Palette

Crown White

 

Crown Alabaster

 

Crown Bamboo Rattan

 

Crown Espresso Leather

 

Crown Walnut Faux Wood

 

Crown Pecan Faux Wood

 

Crown Honey Pine Faux Wood

 

Crown Stucco White

 

S-Curve Toffee Heavy Cotton

 

S-Curve Dover Heavy Cotton

 

S-Curve Ciara Stone

 

S-Curve Ivory Linen

 

S-Curve Ridge Sepia

 

S-Curve Ciara Winter

 

S-Curve Sienna Snow

 

Cut to Width In Store For Free

LEVOLOR stock blinds and shades can be custom cut in store by an associate, so you can get a better fit, light control and privacy.

Perfect for Sliding Doors

Vertical Blinds are an easy way to create a customized look for large windows and sliding doors. LEVOLOR offers headrails and vane styles (sold separately) in a large selection of colors and patterns. The S-curve vane, a stylish twist on the traditional design, provides tighter closure and a drapery-like appearance. Coordinating colors and finishes are now available in faux wood blinds to help you create the perfect look.

Benefits

S-Curve Vanes

 

Crown Vanes

 
 

Additional Features:

  • Cut to width while you shop
  • Reversible headrail enables left or right opening
  • Standard sliding door only requires 2 vane packs (versus 3 competitor vane packs)
  • Limited Lifetime Warranty

Available Sizes:

  • Width: 18 in. to 72 in.
  • Height: up to 72 in.
 

How to Measure


 
 
Measure For Inside Mounting

Measuring For Inside Mount Vertical Blinds

Find Width:

Measure the opening across the top where the headrail is to be installed from inside of window frame on left to inside of window frame on right. Round the measurement down to the nearest 1/8". A minimum depth of 2 7/8" is needed to install inside the window.

Find Height:

Measure from the inside top of the opening on the left, at the center, and on the right to the sill; to the closest 1/8" and note the smallest dimension.

Do not make any allowances: adjustments will automatically be made so the headrail will fit the opening properly and the vanes will clear the sill by 1/4" to 1/2".

 
Minimum Mounting Depth *
  Custom Order
Minimum Depth* 2-1/2"
Headrail Flush 3"
Flush Mount Vanes 3-3/4"
Flush Mount DesignLine Valance 5"
Flush Mount Traditional Valance 6-1/4"
Flush Mount Transitional Valance 5-1/2"
Flush Mount Visions™ Valance 4-3/4"

* Minimum depth is the depth required, in the window frame, for the blind to be mounted inside mount.

 

Measure For Outside Mounting

Measuring For Outside Mount Vertical Blinds

Find Width:

Measure the width of the area to be covered at the place where the headrail will be installed to the nearest 1/8". Blind should overlap opening at least 4" on each side to ensure privacy. To maintain the maximum view, allow adequate overlap and consider the stack width.

Find Height:

Measure the height of the area to be covered round down to the nearest 1/8". Blind should extend at least 3" above and 3" below opening or window moulding.

For installations to the floor, deduct 1/2" from the shortest height for proper clearance.

Specifying outside mount measurement means the factory makes allowances for headrail deductions only.

 
Allow Some Overlap

For outside mount applications allow the blind to overlap 1-1/2" to 3" on the sides, top and bottom of the window.

You must add the overlap to your measurement; LEVOLOR does not add width or height for overlap on Outside Mounted blinds.

 
Notes

Blinds installed on windows near wall or baseboard heaters must clear the heaters by 12" above and 6" to the side.

Make sure there are no obstructions on either side of the window that may prevent you from ordering a wider blind.

Measure the area to the left and right of each window from the frame to the nearest obstruction (e.g. corner, fireplace, corner window, bookcases).

 
 

Measure For Outside Mounting

Measuring For Patio Doors

Find Width:

Measure the width of the area to be covered at the place where the headrail will be installed to the nearest 1/8". Blind should overlap opening at least 4" on each side to ensure privacy.

Find Height:

Measure the height of the area to be covered at the left, center and right and round down to the nearest 1/8". Blind should extend at least 3" above opening or window moulding.

To ensure easy access through the door and allow adequate overlap, consider the stack width.

For installations to the floor, deduct 1/2" from the shortest height for proper clearance.

Specifying outside mount measurement means the factory makes allowances for headrail deductions only.

 

Vane Count and Stacking Chart


To Use This Chart:

These charts represent the amount of blind that is gathered to either side of the window when fully drawn. The measurements in these charts include the stack of the fabric.

One Way Dual Draw
Blind Width No. of Vanes Stack Width Clear Opening No. of Vanes Stack Width Clear Opening
13-1/8" 4 3-7/8" 9-1/4" -- -- --
16-1/4" 5 4-1/8" 12-1/8" -- -- --
19-3/8" 6 4-1/2" 15" -- -- --
22-1/2" 7 4-3/4" 17-3/4" -- -- --
25-5/8" 8 5-1/8" 20-1/2" 8 3-7/8" 18"
28-3/4" 9 5-1/2" 23-1/4" -- -- --
31-7/8" 10 5-3/4" 26" 10 4-1/8" 23-5/8"
35" 11 6-1/8" 28-7/8" -- -- --
38-1/8" 12 6-1/2" 31-5/8" 12 4-1/2" 29"
41-1/4" 13 6-3/4" 34-1/2" -- -- --
44-3/8" 14 7-1/8" 37-1/4" 14 4-3/4" 34-3/4"
47-1/2" 15 7-1/2" 40" -- -- --
50-5/8" 16 7-3/4" 42-3/4" 16 5-1/4" 40-3/8"
53-3/4" 17 8-1/8" 45-5/8" -- -- --
56-7/8" 18 8-1/2" 48-3/8" 18 5-1/2" 46"
60" 19 8-3/4" 51-1/4" -- -- --
63-1/8" 20 9-1/8" 54" 20 5-3/4" 51-1/2"
66-1/4" 21 9-3/8" 56-7/8" -- -- --
69-3/8" 22 9-3/4" 59-5/8" 22 6-1/8" 57"
72-1/2" 23 10-1/8" 62-3/8" -- -- --
75-5/8" 24 10-3/8" 65-1/4" 24 6-1/2" 62-3/4"
78-3/4" 25 10-3/4" 68" -- -- --
81-7/8" 26 11-1/8" 70-3/4" 26 6-3/4" 68-1/4"
85" 27 11-3/8" 73-1/2" -- -- --
88-1/8" 28 11-3/4" 76-3/8" 28 7-1/8" 74"
91-1/4" 29 12-1/8" 79-1/8" -- -- --
94-3/8" 30 12-3/8" 82" 30 7-1/2" 79-1/2"
97-1/2" 31 12-3/4" 84-3/4" -- -- --
100-5/8" 32 13" 87-5/8" 32 7-3/4" 85-1/8"
103-3/4" 33 13-3/8" 90-1/4" -- -- --
106-7/8" 34 13-3/4" 93" 34 8" 90-5/8"
110" 35 14" 96" -- -- --
113-1/8" 36 14-3/8" 98-3/4" 36 8-1/2" 96-1/4"
116-1/4" 37 14-3/4" 101-1/2" -- -- --
119-3/8" 38 15" 104-3/8" 38 8-3/4" 101-7/8"
122-1/2" 39 15-3/8" 107-1/8" -- -- --
125-5/8" 40 15-3/4" 110" 40 9-1/8" 107-3/8"
128-3/4" 41 16" 112-3/4" -- -- --
131-7/8" 42 16-3/8" 115-1/2" 42 9-3/8" 113"
135" 43 16-3/4" 118-1/2" -- -- --
138-1/8" 44 17" 121" 44 9-3/4" 118-5/8"
141-1/4" 45 17-3/8" 123-7/8" -- -- --
144-3/8" 46 17-5/8" 126-1/2" 46 10" 124-1/4"
147-1/2" 47 18" 129-1/2" -- -- --
150-5/8" 48 18-3/8" 132-1/4" 48 10-3/8" 129-3/4"
153-3/4" 49 18-5/8" 135-1/8" -- -- --
156-7/8" 50 19" 138" 50 10-3/4" 135-3/8"
160" 51 19-3/8" 140-5/8" -- -- --
163-1/8" 52 19-5/8" 143-1/2" 52 11-1/8" 141"
166-1/4" 53 20" 146-1/4" -- -- --
169-3/8" 54 20-3/8" 149" 54 11-1/2" 146-1/2"
172-1/2" 55 20-5/8" 151-7/8" -- -- --
175-5/8" 56 21" 154-3/4" 56 11-3/4" 152-1/8"
178-3/4" 57 21-1/4" 157-1/2" -- -- --
181-7/8" 58 21-5/8" 160-1/4" 58 12-1/8" 157-1/2"
185" 59 22" 163" -- -- --
188-3/8" 60 22-1/4" 165-7/8" 60 12-3/8" 163-3/8"

How to Install Stock Vertical Blinds


 
 

Before you begin your installation:

Read all installation instructions!

  • Make sure that you have all tools and hardware needed for installation.
  • Check the installation surface (wall, ceiling, or window frame) to ensure that you have suitable fasteners and tools for the material.
  • Double check the headrail and blinds for proper width and length. If you are installing several sets of blinds, be sure to match them with the appropriate window.
  • Check the parts list shipped with the product to confirm that you have the correct number of brackets.
 

Inside Mount Installation Video

 

Outside Mount Installation Video

 

Parts List

 
Width Up to 48 in. 48 in. to 78 in. Greater than 78 in.
A. Mounting Bracket 2 3 4
B. Valance clip 2 3 4
C. Groover valance return 2 2 2
D. Valance corner 2 2 2
E. Groover valance 1 1 1
F. #6 Screw x 1 1/4 in. 4 6 8
 

1. Tools You May Need (not included):

  • Tape Measure
  • Pencil
  • Flat-blade or Philips Head Screwdriver
  • Drill with Bits
 

2. Bracket Placement

Outside Mount

Inside Mount

Ceiling Mount

 

3. Headrail Preparation

Where applicable.

 

4. Headrail Attachment

Left to right opening recommended for S-Curve vanes.

 

5. Vane Attachment

Spread vane clips evenly across the headrail.

 

6. Valance Attachment

 

7. Vane Removal