Back to Products
Custom

Stock Cordless Cellular Shades

Starting at:  $36.97
• Energy-efficient cells block air flow and insulate your home in winter and summer
• Stylish fabrics are versatile, and create a soft and timeless look
• Easy-lift cordless design gives windows a clean look, and is ideal for homes with children and pets
• Width can be trimmed for free while you shop, exclusively at Lowe's
• Available in 4 finishes; fits windows 18"-72" wide and up to 72" tall
Details How to Measure How to Install

Stock Cellular Shades


Color Palette

Toffee

Toffee

 
Sand

Sand

 
Snow

Snow

 
Candlelight

Candlelight

 
Graphite

Graphite

 

Cut to Width In Store For Free

LEVOLOR stock blinds and shades can be custom cut in store by an associate, so you can get a better fit, light control and privacy.

Energy Efficient

Cordless Cellular Shades are a versatile window covering. Energy efficient cells help insulate rooms by acting as thermal barriers, trapping air and improving your home’s energy efficiency. This can help lower your energy bills in both summer and winter.

Benefits

Energy Efficient

Cells act as a thermal barrier for your window.

 

Cordless

Easy to use and provides a safer option.

 

Quality Fabric

Soft, durable and easy to clean in two light control levels.

 
 

Additional Features:

  • Cut to width while you shop
  • Limited Lifetime Warranty

Available Sizes:

  • Width: 18 in. to 72 in.
  • Height: up to 72 in.
 

How to Measure


 
 
Measure For Inside Mounting

Measuring For Inside Mount Cellular Shades

Find Width:

Measure exact distance between inside surfaces of window frame at the top, middle, and bottom, and use the narrowest width. Do not make any width deductions. For custom shades, the factory will automatically deduct 3/8" from the shade width; for Stock shades, a 1/2" deduction will be taken on the entire shade.

Find Height:

Measure exact distance from inside surface at top of window to sill. If you prefer shade not to touch sill, deduct 1/4". If there is no sill, measure height to point where shade is to reach.

 
 

Measure For Outside Mounting

Measuring For Outside Mount Cellular Shades

Find Width:

Measure exact distance between the outermost points where the shade is to be placed. This measurement should overlap each side of window frame by at least 1-1/2". Factory makes no deduction from your shade width dimensions.

Find Height:

Measure exact distance from where top of shade will be located to top of sill. If there is no sill or if shade is to overlap window frame, measure to point shade is to reach

 
Allow Some Overlap

For outside mount applications allow the shade to overlap 1-1/2" to 3" on the sides, top and bottom of the window.

You must add the overlap to your measurement; LEVOLOR does not add width or height for overlap on Outside Mounted shades.

 
 

Critical Dimensions

 

Minimum Mounting Surface

  Headrail Dimensions
(Depth x Height)
Headrail Protrudes
(Side, Back or Top Mount)
Flush Mount Headrail
 
Corded Double Cell 2-1/8" x 9/16" 5/8" 2-1/2"
Corded Single Cell 1-7/8" x 9/16" 5/8" 2-1/4"
Cordless and Continuous Cordloop 1-7/8" x 1-3/8" 1/2" 2-1/8"
Stock Cordless 3/4" x 1-1/2" 5/8" 1-7/8"
 

Use the above chart to verify that you have adequate window depth for mounting.

NOTE: If flush mount is desired, the headrail will not extend past the window frame into the room. Consider headrail size and brackets when installing flush mount.

 
 

How to Install Stock Cellular Shades


 
 

Before you begin your installation:

Read all installation instructions!

  • Make sure that you have all tools and hardware needed for installation.
  • Check the installation surface (wall, ceiling, or window frame) to ensure that you have suitable fasteners and tools for the material.
  • Double check the headrail and shade for proper width and length. If you are installing several sets of shades, be sure to match them with the appropriate window.
  • Check the parts list shipped with the product to confirm that you have the correct number of brackets.
 

Inside Mount Installation Video

 

Outside Mount Installation Video

 

Parts List

 
Width Up to 36 in. Greater than 48"
A. Endcaps 4 4
B. Mounting Brackets 2 3
C. #6 Screw x 1 1/4 in. 4 6
 

1. Tools You May Need (not included):

  • Tape Measure
  • Pencil
  • Flat-blade or Philips Head Screwdriver
  • Drill with Bits
 

2. Unpacking the Parts

Remove these parts packed in the headrail. Quantity varies with shade size.

 

3. Bracket Placement

Pre-drill wood frame if necessary.

Inside Mount

Outside Mount

 

4. Endcaps

 

5. Shade Attachment