feedback

measure for: inside mount panel track shades

  1. To find width: Measure the width of the window at the top. The factory will automatically deduct 1/4" for clearance.
  2. To find height: Measure the height of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the shade height. The factory will automatically deduct 1/8".
 

measure for: outside mount panel track shades

  1. To find width: Measure the width of the window and add 4" to each side for light blockout and privacy. Give this measurement when ordering.
  2. To find width: Measure the exact height of the window in 2 places. Use the greater height. Add the recommended overlap of 3" top and bottom for a total overlap of 6". Give this measurement when ordering.

notes

  • Blinds installed on windows near wall or baseboard heaters must clear the heaters by 12" above and 6" to the side.
 

measure for: ceiling mount panel track shades

  1. Follow the Inside Mount instructions above with exceptions noted here. For wall-to-wall installation, specify exact width at ceiling height, factory will automatically deduct 1/4". For ceiling to floor shades, measure to the top of the carpet pile in 3 places, use the smallest measurement. Factory will automatically deduct 1/4".
 

measure for patio doors

  1. Measure the exact width of the patio door. A minimum 4" addition on each side is recommended.
 
 
close

We'd like to hear from you. Choose from the following:

 

If you require immediate assistance or product support,
please contact our customer service department.