Knowledge Base

How do I replace the tilter on my wood blind?

First, remove the blind from the window. If you have a wand tilt, remove the wand. If you have a cord tilt, remove the tassels. Next, remove the metal end brace or plastic end cap from the headrail at the end opposite the tilter. Slide the tilt rod out of the tilter just enough to clear it. Remove the existing tilter. Replace with new tilter and push down until it snaps into place. Operate tilter shaft until the flat portion of the rod lines up with the flat portion inside the tilter. Push the rod back through the tilter and replace cap/brace. For a cord tilt, make certain the tassels are even when the blind is in the open position. The tassels must be attached after the cord tilter is installed.
Rating: