- Lift to fully raised position.
- Remove blind from window.
- Install 1 shim/clip per blind as shown in picture. Push shim/clip until it "snaps" in place.
Search Knowledge Base
How do I adjust cordless metal blinds that are sagging or creeping up from the bottom?
To correct this issue, look inside the head rail and locate the spring motor (the mechanism that retracts the internal cords). Each end of the spring motor should have a shim/clip. If one or both ends are missing a shim/clip, contact customer service for a replacement. After it arrives, install with the following steps:
Category: Metal Blinds