How to Install Stock Cordless Faux, Faux and Real Wood Blinds

 
 

Before you begin your installation:

Read all installation instructions!

  • Make sure that you have all tools and hardware needed for installation.
  • Check the installation surface (wall, ceiling, or window frame) to ensure that you have suitable fasteners and tools for the material.
  • Double check the headrail and blinds for proper width and length. If you are installing several sets of blinds, be sure to match them with the appropriate window.
  • Check the parts list shipped with the product to confirm that you have the correct number of brackets.
 

Width Up to 37 in. 37 in. to 47 in. Greater than 47 in.
A. Box Bracket (Left and Right) 2 2 2
B. Support Bracket 0 1 1
C. Valance Clip 2 2 3
D. Bottomrail Endcap* 2 2 2
E. Hold-down Bracket** 2 2 2
F. #5 Screw x 3/4 in.** 4 4 4
G. #6 Screw x 1 1/4 in. 5 7 7

*Not Required for Real Wood. **Not required for Real Wood or Cordless Faux Wood

 

1. Tools You May Need (not included):

  • Tape Measure
  • Pencil
  • Flat-blade or Philips Head Screwdriver
  • Drill with Bits
 

2. Unpacking the Parts

Remove these parts packed in the headrail. Quantity varies with blind size.

 

2. Bracket Placement

Left Bracket / Right Bracket

Inside Mount

Outside Mount

 
 

4. Valance Clips & Wand

 

Snap together where applicable.

 

5. Finishing Up

IF APPLICABLE: Hold-down Brackets