How to Install Stock Natural Shades

 
 

Before you begin your installation:

Read all installation instructions!

IMPORTANT: If bound, do not remove binding until the shade is installed in the window.

  • Make sure that you have all tools and hardware needed for installation.
  • Check the installation surface (wall, ceiling, or window frame) to ensure that you have suitable fasteners and tools for the material.
  • Double check the headrail and shade for proper width and length. If you are installing several sets of shades, be sure to match them with the appropriate window.
  • Check the parts list shipped with the product to confirm that you have the correct number of brackets.
 

Parts List

 
 
Width Up to 36 in. 36 in. to 48 in. Greater than 48 in.
A. Bracket/Wingnut 2 3 4
B. Cord Cleat 1 1 1
C. #6 Screw x 1-1/4 in. 5 7 9
D. Phillips 3/8 in. Screw 2 2 2
 

1. Tools You May Need (not included):

  • Tape Measure
  • Pencil
  • Flat-blade or Philips Head Screwdriver
  • Drill with Bits
 

2. Remove Centering Clip

 

3. Bracket Placement

Pre-drill wood frame if necessary

Inside Mount

Outside Mount

 

4. Shade Attachment

 

 

5. Mount the Cleat